Ürünlerimiz

New Code HYBRID C/T AV (mg KOH/mg) Viscosity (CAP 2000 200C,
750 rpm, 25 sec, cone 6)		 Tg Curing Schedule Description
UniQ-Clad 8820-20  80/20 C 17-25 7500-9500 62 200 °C - 10" Good flow ,fexible and suitable for matt dry blending 
UniQ-Clad 8818-21 80/20 C 17-25 7500-9500 62 180 °C - 10" Good flow and fexible
UniQ-Clad 8716-10 70/30 C 30-34 4000-6500 56 160 °C - 10" Low cure resin with superior flow, high gloss, good yellowing resistance
UniQ-Clad 8716-02 T 70/30 T 29-34 4500-6500 50 160 °C - 10" Very good flow, high gloss, good yellowing resistance
UniQ-Clad 8720-10 70/30 C 32-38 4000-6000 56 200 °C - 10" Excellent flow which is suitable for high pigment/filler loading and very good yellowing resistance 
UniQ-Clad 8718-11 70/30 C 32-38 4000-6000 56 180 °C - 10" Widely used fast cure  resin with yellowing performance & good flow and suitable for thin film application and wrinkle products.
UniQ-Clad 8718-12 T 70/30 T 32-38 4000-6000 56 180 °C - 10" Widely used fast cure  resin with yellowing performance & good flow and suitable for thin film application and wrinkle products. Tribo version of 8718-11
UniQ-Clad 8720-13 T 70/30 T 32-38 4000-6000 56 200 °C - 10" Excellent flow
UniQ-Clad 8716-14 T 70/30 T 32-38 6000-7500 56 160 °C - 10" Suitable for fine texture -sandpaper finishes
UniQ-Clad 8719-15 T 70/30 T 32-38 6500-8000 57 190 / 200 °C - 10" High Flexible ,Modarate flow ,suitable for sandpaper texture and small wrinkle finishes 
UniQ-Clad 8718-59 70/30 C / T 32-38 5000-7000 60 180 °C - 10" Good flow resin with high TG and sutaible for thin film application .
UniQ-Clad 8719-70  70/30 C / T 31-35 6000-8000 62 190 °C - 10" High Flexible ,Good flow ,suitable for sandpaper texture and small wrinkle finishes 
UniQ-Clad 8722-86 70/30 C 32-37 4000-5500 55 Slow cure Need Reactivity modifier ,Very good flow and suitable for hammer finishes 
UniQ-Clad 8722-86-1 70/30 C 32-37 4000-5500 55 Slow cure Need Reactivity modifier ,highly flexible ,very good flow and suitable for hammer tone finishes
UniQ-Clad 8720-20 T 70/30 T 31-35 2500-4000 58 200 °C - 10" Highly flexible & High yellowing performance  ,very good flow and suitable for hammer tone finishes
UniQ-Clad 8718-71 T  70/30 T 29-35 3800-5500 56 180 °C - 10" Excellent flow and good yellowing performance,specially designed for obtaining good flow with higher pigment/filler loading ,Excellent matting peformance resin and suitable for wrinkle products
UniQ-Clad 8720-76 T 70/30 T 32-38 4000-6000 56 200 °C - 10" Highly flexible ,very good flow and suitable for hammer tone finishes
UniQ-Clad 8620-44 T 60/40 C / T 55-65 2000-3300 59 200 °C - 10" Outstanding flow & very good gloss and wetting properties with high pigment loading  in thin film coating and good yellowing performance ,Tribo version of 8620-44 .
UniQ-Clad 8620-44  60/40 C  55-65 2000-3300 59 200 °C - 10" Outstanding flow & very good gloss  and wetting properties with high pigment loading  in thin film coating and good yellowing performance ,
UniQ-Clad 8618-54 T 60/40  T 55-65 2500-3500 58 180 °C - 10" Excellent flow, high pigment loading , very good wetting
UniQ-Clad 8620-54 T 60/40  T 55-65 2500-3500 58 200 °C - 10" Outstanding flow & very good gloss  and wetting properties with high pigment loading  in thin film coating and good yellowing performance.Suitable for low matte finishes.
Tribo version of 8620-54 
UniQ-Clad 8620-54  60/40 C  55-65 2500-3500 58 200 °C - 10" Outstanding flow & very good gloss  and wetting properties with high pigment loading  in thin film coating and good yellowing performance ,Suitable for low matte finishes 
UniQ-Clad 8618-34 T 60/40 T 55-65 3500-6000 57 180 °C - 10" Medium reactivity, good flow, can be used for matte finishes  and wrinkles 
UniQ-Clad 8618-51 60/40 C / T 48-52 2000-2800 57 180 °C - 10" Medium cure resin with wide range of application ,
Outstanding flow & very good gloss  and wetting properties with high pigment loading  in thin film coating and good yellowing performance.
Suitable for low matte finishes
UniQ-Clad 8615-60 T 60/40 T 55-65 2500-3500 59 150 °C - 10" Low cure resin with good flow, high gloss, good yellowing resistance
UniQ-Clad 8515-50 T 55/45 T 62–67 3000-5500 56 150 °C - 10" Low cure resin with good flow, high gloss, good yellowing resistance

 

New Code TGIC C/T AV (mg KOH/mg) Viscosity (CAP 2000 200C,
750 rpm, 25 sec, cone 6)		 Tg Curing Schedule Description
UniQ-Clad 7320-33 T 93/7 T 31-35 3900-5000 58 200 °C - 10" Industrial type fast cure resin with good flow & good surface hardness, suitable for sandpaper texture and small wrinkle finishes
UniQ-Clad 7318-34 T 93/7 T 31-35 3900-5000 58 180 °C - 10" Industrial type fast cure resin with good surface, suitable for sandpaper texture finishes
UniQ-Clad 7320-18 T 93/7 T 31-35 2500-4000 60 200 °C - 10" Outstanding flow &High Gloss Finishes 
UniQ-Clad 7319-19 T 93/7 T 31-35 2500-4000 60 190 °C - 10" Excellent Flow & High Gloss Finishes and accelareted type of 7320-18T.Suitable for matt finishes.
UniQ-Clad 7320-41 T 93/7 T 30-36 3500-5500 65 200 °C - 10" Excellent Flow with high TG .Suitable for wrinkles 
UniQ-Clad 7320-24T 93/7 T 31-36 4000-5200 66 200 °C - 10" Architecture Grade - Outstanding flow with high TG
UniQ-Clad 7318-24 T 93/7 T 31-36 4300-5700 66 180 °C - 10" Architecture Grade - Excellent flow with high TG ,accelareted type of 7320-24 T
UniQ-Clad 7620-07 T 96/4 T 17-25 7500-12500 60 200 °C - 10" Architecture Grade -Slow cure component ,used for outstanding flow &low gloss dry blend  with 7020-50T or 7020-20T
UniQ-Clad 7020-50 T 90/10 T 48-58 4700-6700 70 200 °C - 10" Architecture Grade -Fast cure component ,used for  outstanding flow & low gloss dry blend with 7620-07T
UniQ-Clad 7020-20 T 90/10 T 45-50 4500-6500 70 200 °C - 10" Architecture Grade -Fast cure component ,used for  outstanding flow & low gloss dry blend with 7620-07T

 

New Code PRIMID C/T AV (mg KOH/mg) Viscosity (CAP 2000 200C,
750 rpm, 25 sec, cone 6)		 Tg Curing Schedule Description
UniQ-Clad 9518-63T 95/5 C/T 31-35 3900-5000 58 180 °C - 10" Industrial economic type fast cure resin with modarate  flow , suitable for sandpaper texture  and small wrinkle finishes
UniQ-Clad 9518-67T 93/7 - 95/5 T 31-35 3800-4500 58 180 °C - 10" Curing both with TGIC and HAA systems
UniQ-Clad 9518-65T 95/5 C/T 31-35 2000-3500 58 180 °C - 10" Industrial Type ,Excellent flow & High Gloss and suitable for coarse wrinkle &hammer finishes 
UniQ-Clad 9516-08T 95/5 C 31-35 3600-4600 57 180 °C - 10" UV improved version of 89-604 resin ,Industrial type low cure resin with good flow & yellowing performance.
UniQ-Clad 9516-04 95/5 C 31-35 3600-4600 57 160 °C - 10" Industrial type low cure resin with good flow & yellowing performance 
UniQ-Clad 9517-60T  95/5 T 31-35 3400-4500 58 170 °C - 10" High pinhole limit and mechnical properties- good flow industrial
UniQ-Clad 9518-16 95/5 C 31-37 2500-3500 58 180 °C - 10" Industrial Type ,Excellent flow & High Gloss , Gas oven stabilized .Suitable for wrinkle finishes.
UniQ-Clad 9518-16T 95/5 T 31-37 2500-3500 58 180 °C - 10" Industrial Type ,Excellent flow & High Gloss , Gas oven stabilized
UniQ-Clad 9718-86 97/3 C 16-22 7500-9500 63 180 °C - 10" Architecture grade High tg HAA resin 
UniQ-Clad 9618-14T 96/4 C/T 20-28 3500-6000 58 180 °C - 10" For General Industrial application, High pigment Loading
UniQ-Clad 9618-82T 96.5/3.5 C/T 20-28 3800-5200 56 180 °C - 10" High gloss, also used in Industrial matt dry blend sys.with UniQ-Clad M-89-804
UniQ-Clad 9018-04T 90/10 T 65-75 1500-2500 60 180 °C - 10" Industrial-Good flow and mech. properties, Matt finish.
UniQ Clad 9518-15T 95/5 T 31-37 2000-3600 58 180 °C - 10" Class 1, High Gloss, very good flow and pinhole limit
UniQ Clad 9518-66T 95/5 T 30-36 4000-6000 61 180 °C - 10" Class 1, High Gloss and high tg , good flow and pinhole limit
UniQ Clad 9518-76T 95/5 T 30-36 4000-6000 62 180 °C - 10" Class 1,High Gloss and highest TG & Blanching Performance
UniQ-Clad 9719-92T 97/3 T 20-24 6000-8000 61 190 °C - 10" Class 1  High gloss, also used in architecture matt dry blend sys.with UniQ-Clad 9018-05T
UniQ-Clad 9318-03T 93/7  T 45-55 4000-6000 60 180 °C - 10" Class1, Good flow and mech. properties, Architecture grade Matt finish
UniQ-Clad 9018-05T 90/10 T 65-75 1500-2500 60 180 °C - 10" Class1, Good flow and mech. properties, Architecture grade Matt finish
UniQ-Clad 9618-88T 96.5/3.5 T 18-25 6000-8000 57 180 °C - 10" Class 1  High gloss, also used in architecture matt dry blend sys.with UniQ-Clad 9018-05T
UniQ-Clad 9518-50T 95/5 T 27-33 2300-3300 55 180 °C - 10" Class 1,5  grade resin with  excellent flow and excellent degassing performance
UniQ-Clad 9518-11 95/5 C 29-33 2400-4000 60 180 °C - 10" Class 2 Superdurable resin with good mechanical properties

 

Excel olarak indir

Bize Ulaşın

Ekibimize iletmek istediğiniz her türlü soru ve talepleriniz için aşağıdaki formu kullanabilirsiniz

Lütfen bekleyiniz.. E-posta adresi hatalı. * işaretli alanlar boş bırakılamaz. Mesajınız başarı ile gönderildi. Hata oluştu lütfen tekrar deneyiniz.